Skip to content

Cart

Your cart is empty

Lenses by ZEISS

Every pair of Luxforde glasses is made with ZEISS lenses. It is the same choice we make for our patients in clinic every day.

A partnership that started in practice

Luxforde was founded by Eddie Coyle, a GOC-registered optometrist who runs Eddie Coyle Optometrists in Cambuslang and Dennistoun, Glasgow. ZEISS is the preferred lens partner of both practices, and Luxforde is built on that same relationship.

So the lenses in your Luxforde frames are not a white-label alternative chosen on price. They are the ZEISS lenses we fit, check and stand behind in our own practices.

ZEISS ClearView single vision lenses

Every Luxforde frame comes with ZEISS ClearView lenses as standard. Most standard single vision lenses are optimised at only a handful of points. ClearView uses ZEISS ClearForm® freeform technology, optimised at more than 700 points across the lens surface, so vision stays clear from the centre towards the edges.

  • Clearer, wider vision: up to 3× larger areas of excellent clarity.1
  • Flatter and thinner: up to 49% flatter and up to 16% thinner, for a lighter, better-looking lens.2
  • Full UV protection: made in ZEISS UVProtect lens material, with UV protection up to 400 nm built into the lens itself.3

Finished with ZEISS DuraVision Plus Platinum UV

Every pair is finished with ZEISS DuraVision® Plus Platinum UV, one of ZEISS's premium anti-reflective coatings, at no extra cost.

  • Clearer: up to 50% fewer reflections, so your lenses are less noticeable and your eyes are easier to see.4
  • Harder: very high scratch resistance, with an average Bayer ratio of 15. The Bayer test is the industry standard for scratch resistance; anything above 10 is considered very high.5
  • Cleaner: ZEISS CleanGuard™ technology repels water, grease and dust, and makes lenses up to three times faster to clean.6
  • UV protection on both sides: the coating also cuts UV reflected into your eyes from the back of the lens.3

Look closely and you may see a very faint blue sheen on the lens surface. That is normal: it is how this coating keeps reflections so low.

ClearView in every thickness

For stronger prescriptions, choose a thinner ZEISS ClearView lens. When you enter your prescription, we recommend the thickness that suits both your prescription and your frame. You can always choose a different option.

  • Standard 1.50: included
  • Thin 1.60: +£30
  • Thinner 1.67: +£60
  • Thinnest 1.74: +£100 (minus prescriptions)

Checked before they are made

Before your lenses are made, a GOC-registered optometrist checks your prescription against the copy you send us. If anything doesn't match, we contact you first.

1 Simulated average compared with ZEISS aspheric finished single vision lenses, 1.60 index. 2 Compared with ZEISS spherical finished single vision lenses; maximum flatness reduction at −5.00 D, maximum thickness reduction at +5.00/−2.00. 3 Full UV protection up to 400 nm on the front surface with ZEISS UVProtect lens material; DuraVision Plus coatings additionally protect against UV reflected from the back surface. 4 Compared with ZEISS DuraVision Chrome: reflectance (R%) of DuraVision Plus Platinum UV 1.60 finished single vision 0.409% vs DuraVision Chrome 0.825%, single side. 5 Average Bayer ratio across 1.50, 1.56, 1.59, 1.60 and 1.67 lens materials. 6 Compared with ZEISS DuraVision lenses with the previous generation of top coat. Figures from ZEISS. ZEISS, ClearView, ClearForm, DuraVision, CleanGuard and UVProtect are trademarks of the ZEISS Group.